*
* EXPERTS ONLY!! EXPERTS ONLY!!
*
- * This class implements the mapping functions needed to lay out the physical
+ * This file implements the mapping functions needed to lay out the physical
* cubes and the output ports on the panda board. It should only be modified
* when physical changes or tuning is being done to the structure.
*/
-class SCMapping implements GLucose.Mapping {
- public Cube[] buildCubeArray() {
- // TODO(mcslee): find a cleaner way of representing this data, probably
- // serialized in some more neutral form. also figure out what's going on
- // with the indexing starting at 1 and some indices missing.
- Cube[] cubes = new Cube[79];
-
- int cubeIndex = 1;
-
- cubes[cubeIndex++] = new Cube(0, 0, 0, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(5, Cube.EDGE_HEIGHT, -10, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(0, 2*Cube.EDGE_HEIGHT, -6, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(-5, 3*Cube.EDGE_HEIGHT, -2, 0, -20, 0);
-
- cubes[cubeIndex++] = new Cube(Cube.EDGE_WIDTH + 2, 0, 0, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(Cube.EDGE_WIDTH + 2, Cube.EDGE_HEIGHT, 5, 0, 10, 0);
- cubes[cubeIndex++] = new Cube(Cube.EDGE_WIDTH + 2, 2*Cube.EDGE_HEIGHT, 2, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(Cube.EDGE_WIDTH + 2, 3*Cube.EDGE_HEIGHT, 0, 0, 30, 0);
-
- // Back Cubes behind DJ platform (in order of increasing x)
- cubes[cubeIndex++] = new Cube(50, 0, BASS_DEPTH, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(52, 5+Cube.EDGE_HEIGHT, BASS_DEPTH, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(48, 5+2*Cube.EDGE_HEIGHT, BASS_DEPTH + 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(45, 5+3*Cube.EDGE_HEIGHT, BASS_DEPTH + 15, 0, -20, 0);
- cubes[cubeIndex++] = new Cube(48, 5+4*Cube.EDGE_HEIGHT, BASS_DEPTH + 13, 0, 0, 0);
-
- cubes[cubeIndex++] = new Cube(79, 0, BASS_DEPTH, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(81, 5+Cube.EDGE_HEIGHT, BASS_DEPTH, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(83, 5+2*Cube.EDGE_HEIGHT, BASS_DEPTH + 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(81, 5+3*Cube.EDGE_HEIGHT, BASS_DEPTH + 15, 0, -20, 0);
- cubes[cubeIndex++] = new Cube(79, 5+4*Cube.EDGE_HEIGHT, BASS_DEPTH + 13, 0, 0, 0);
-
- cubes[cubeIndex++] = new Cube(107, 0, BASS_DEPTH, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(111, 5+Cube.EDGE_HEIGHT, BASS_DEPTH, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(113, 5+2*Cube.EDGE_HEIGHT, BASS_DEPTH + 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(110, 5+3*Cube.EDGE_HEIGHT, BASS_DEPTH + 15, 0, -20, 0);
- // cubes[cubeIndex++] = new Cube(115, 5+4*Cube.EDGE_HEIGHT, BASS_DEPTH + 13, 0, 0, 0);
-
- cubes[cubeIndex++] = new Cube(133, 0, BASS_DEPTH, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(131, 5+Cube.EDGE_HEIGHT, BASS_DEPTH, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(133, 5+2*Cube.EDGE_HEIGHT, BASS_DEPTH + 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(135, 5+3*Cube.EDGE_HEIGHT, BASS_DEPTH + 15, 0, -20, 0);
- // cubes[cubeIndex++] = new Cube(137, 5+4*Cube.EDGE_HEIGHT, BASS_DEPTH + 13, 0, 0, 0);
-
- cubes[cubeIndex++] = new Cube(165, 0, BASS_DEPTH, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(164, 5+Cube.EDGE_HEIGHT, BASS_DEPTH, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(167, 5+2*Cube.EDGE_HEIGHT, BASS_DEPTH + 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(163, 5+3*Cube.EDGE_HEIGHT, BASS_DEPTH + 15, 0, -20, 0);
- cubes[cubeIndex++] = new Cube(168, 5+4*Cube.EDGE_HEIGHT, BASS_DEPTH + 13, 0, 0, 0);
-
- // front DJ cubes
- cubes[cubeIndex++] = new Cube( (TRAILER_WIDTH - BASS_WIDTH)/2, BASS_HEIGHT + 0, 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2, BASS_HEIGHT + Cube.EDGE_HEIGHT, 0, 0, 20, 0);
-
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + Cube.EDGE_HEIGHT + 3, BASS_HEIGHT, 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + Cube.EDGE_HEIGHT + 2, BASS_HEIGHT+Cube.EDGE_HEIGHT, 0, 0, 20, 0);
-
-
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + 2*Cube.EDGE_HEIGHT + 5, BASS_HEIGHT + 0, 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + 2*Cube.EDGE_HEIGHT + 6, BASS_HEIGHT + Cube.EDGE_HEIGHT, 10, 0, 10, 0);
-
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + 3*Cube.EDGE_HEIGHT + 9, BASS_HEIGHT + 0, 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + 3*Cube.EDGE_HEIGHT + 8, BASS_HEIGHT + Cube.EDGE_HEIGHT, 10, 0, 0, 0);
-
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + 4*Cube.EDGE_HEIGHT + 15, BASS_HEIGHT + 0, 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + 4*Cube.EDGE_HEIGHT + 14, BASS_HEIGHT + Cube.EDGE_HEIGHT, 10, 0, 0, 0);
-
- // left dj cubes
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2, BASS_HEIGHT + 0, Cube.EDGE_HEIGHT + 2, 0, 0, 0);
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2, BASS_HEIGHT + Cube.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 4, 0, 20, 0);
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2, BASS_HEIGHT + 0, 2*Cube.EDGE_HEIGHT + 4, 0, 0, 0);
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2, BASS_HEIGHT + Cube.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 6, 0, 20, 0);
-
- // right dj cubes
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + 4*Cube.EDGE_HEIGHT + 15, BASS_HEIGHT + 0, Cube.EDGE_HEIGHT + 2, 0, 0, 0);
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + 4*Cube.EDGE_HEIGHT + 15, BASS_HEIGHT + Cube.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 4, 0, 20, 0);
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + 4*Cube.EDGE_HEIGHT + 15, BASS_HEIGHT + 0, 2*Cube.EDGE_HEIGHT + 4, 0, 0, 0);
- cubes[cubeIndex++] = new Cube((TRAILER_WIDTH - BASS_WIDTH)/2 + 4*Cube.EDGE_HEIGHT + 15, BASS_HEIGHT + Cube.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 6, 0, 20, 0);
-
- cubes[cubeIndex++] = new Cube(200, 0, 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(205, Cube.EDGE_HEIGHT, 0, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(200, 2*Cube.EDGE_HEIGHT, 4, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(195, 3*Cube.EDGE_HEIGHT, 8, 0, -20, 0);
- cubes[cubeIndex++] = new Cube(200, 4*Cube.EDGE_HEIGHT, 3, 0, 0, 0);
-
- cubes[cubeIndex++] = new Cube(200, 0, 10, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(205, Cube.EDGE_HEIGHT, 0, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(200, 2*Cube.EDGE_HEIGHT, 4, 0, 0, 0);
- cubes[cubeIndex++] = new Cube(195, 3*Cube.EDGE_HEIGHT, 8, 0, -20, 0);
-
- cubes[cubeIndex++] = new Cube(10, 0 , Cube.EDGE_HEIGHT + 10, 0, 40, 0);
- cubes[cubeIndex++] = new Cube(3, Cube.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 8, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(0, 2*Cube.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 10, 0, 40, 0);
- cubes[cubeIndex++] = new Cube(0, 3*Cube.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 10, 0, 60, 0);
- cubes[cubeIndex++] = new Cube(0, 4*Cube.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 10, 0, 40, 0);
-
- cubes[cubeIndex++] = new Cube(20, 0, 2*Cube.EDGE_HEIGHT + 18, 0, 40, 0);
- cubes[cubeIndex++] = new Cube(30, Cube.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 18, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(25, 2*Cube.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 18, 0, 40, 0);
- cubes[cubeIndex++] = new Cube(30, 3*Cube.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 18, 0, 60, 0);
- cubes[cubeIndex++] = new Cube(32, 4*Cube.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 18, 0, 40, 0);
-
- cubes[cubeIndex++] = new Cube(210, 0, Cube.EDGE_HEIGHT + 15, 0, 40, 0);
- cubes[cubeIndex++] = new Cube(215, Cube.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 15, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(218, 2*Cube.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 15, 0, 40, 0);
- cubes[cubeIndex++] = new Cube(213, 3*Cube.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 15, 0, 60, 0);
- cubes[cubeIndex++] = new Cube(210, 4*Cube.EDGE_HEIGHT, Cube.EDGE_HEIGHT + 15, 0, 40, 0);
-
- cubes[cubeIndex++] = new Cube(210, 0, 2*Cube.EDGE_HEIGHT + 25, 0, 40, 0);
- cubes[cubeIndex++] = new Cube(215, Cube.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 25, 0, 20, 0);
- cubes[cubeIndex++] = new Cube(212, 2*Cube.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 25, 0, 40, 0);
- cubes[cubeIndex++] = new Cube(215, 3*Cube.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 25, 0, 60, 0);
- cubes[cubeIndex++] = new Cube(210, 4*Cube.EDGE_HEIGHT, 2*Cube.EDGE_HEIGHT + 25, 0, 40, 0);
-
- return cubes;
- }
- public int[][] buildFrontChannelList() {
- return new int[][] {
- { 1, 2, 3, 4, 0 }, // ch1
- { 5, 6, 7, 8, 0 }, // ch2
- { 9, 10, 11, 12, 0 }, // ch3
- { 13, 14, 15, 16, 0 }, // ch4
- { 17, 18, 19, 20, 0 }, // ch5
- { 21, 22, 23, 24, 0 }, // ch6
- { 25, 26, 27, 28, 0 }, // ch7
- { 29, 30, 31, 32, 0 }, // ch8
- };
+<<<<<<< HEAD
+final int MaxCubeHeight = 6;
+final int NumBackTowers = 16;
+
+public Model buildModel() {
+
+ // Shorthand helpers for specifying wiring more quickly
+ final Cube.Wiring WFL = Cube.Wiring.FRONT_LEFT;
+ final Cube.Wiring WFR = Cube.Wiring.FRONT_RIGHT;
+ final Cube.Wiring WRL = Cube.Wiring.REAR_LEFT;
+ final Cube.Wiring WRR = Cube.Wiring.REAR_RIGHT;
+
+ // Utility value if you need the height of a cube shorthand
+ final float CH = Cube.EDGE_HEIGHT;
+ final float CW = Cube.EDGE_WIDTH ;
+
+ // Positions for the bass box
+ final float BBY = BassBox.EDGE_HEIGHT + BoothFloor.PLEXI_WIDTH;
+ final float BBX = 56;
+ final float BBZ = 2;
+
+ // The model is represented as an array of towers. The cubes in the tower
+ // are represenented relatively. Each tower has an x, y, z reference position,
+ // which is typically the base cube's bottom left corner.
+ //
+ // Following that is an array of floats. A 2-d array contains an x-offset
+ // and a z-offset from the previous reference position. Typically the first cube
+ // will just be {0, 0}. Each successive cube uses the position of the previous
+ // cube as its reference.
+ //
+ // A 3-d array contains an x-offset, a z-offset, and a rotation about the
+ // y-axis.
+ //
+ // The cubes automatically increment their y-position by Cube.EDGE_HEIGHT.
+
+ // To-Do: (Mark Slee, Alex Green, or Ben Morrow): The Cube # is determined by the order in this list.
+ // "raw object index" is serialized by running through towermapping and then individual cube mapping below.
+ // We can do better than this. The raw object index should be obvious from the code-- looking through the
+ // rendered simulation and counting through cubes in mapping mode is grossly inefficient.
+
+ TowerMapping[] towerCubes = new TowerMapping[] {};
+
+ // Single cubes can be constructed directly here if you need them
+ Cube[] singleCubes = new Cube[] {
+ // new Cube(15, int( Cube.EDGE_HEIGHT), 39, 0, 10, 0, WRL), // Back left channel behind speaker
+ //new Cube(x, y, z, rx, ry, rz, wiring),
+ //new Cube(0,0,0,0,225,0, WRR),
+ };
+
+ // The bass box!
+ // BassBox bassBox = BassBox.unlitBassBox(BBX, 0, BBZ); // frame exists, no lights
+ BassBox bassBox = BassBox.noBassBox(); // no bass box at all
+ // BassBox bassBox = new BassBox(BBX, 0, BBZ); // bass box with lights
+
+ // The speakers!
+ List<Speaker> speakers = Arrays.asList(new Speaker[] {
+ // Each speaker parameter is x, y, z, rotation, the left speaker comes first
+ // new Speaker(TRAILER_WIDTH - Speaker.EDGE_WIDTH + 8, 6, 3, -15)
+ });
+
+
+ ////////////////////////////////////////////////////////////////////////
+ // dan's proposed lattice
+ ArrayList<StaggeredTower> scubes = new ArrayList<StaggeredTower>();
+ //if (NumBackTowers != 25) exit();
+ for (int i=0; i<NumBackTowers/2; i++) scubes.add(new StaggeredTower(
+ (i+1)*CW, // x
+ (i % 2 == 0) ? 0 : CH * 2./3. , // y
+ - ((i % 2 == 0) ? 11 : 0) + 80 , // z
+ -45, (i % 2 == 0) ? MaxCubeHeight : MaxCubeHeight) ); // num cubes
+
+ for (int i=0; i<NumBackTowers/2; i++) scubes.add(new StaggeredTower(
+ (i+1)*CW, // x
+ (i % 2 == 0) ? 0 : CH * 2./3. , // y
+ - ((i % 2 == 0) ? 0 : 11) + 80 - pow(CH*CH + CW*CW, .5), // z
+ 225, (i % 2 == 0) ? MaxCubeHeight : MaxCubeHeight-1) );
+
+ // for (int i=0; i<2 ; i++) scubes.add(new StaggeredTower(
+ // (i+1)*CW, // x
+ // 0 , // y
+ // - 0 + 97 - 2*pow(CH*CH + CW*CW, .5), // z
+ // 225, MaxCubeHeight ) );
+
+ ArrayList<Cube> dcubes = new ArrayList<Cube>();
+ // for (int i=1; i<6; i++) {
+ // if (i>1) dcubes.add(new Cube(-6+CW*4/3*i , 0, 0, 0, 0, 0, WRR));
+ // dcubes.add(new Cube(-6+CW*4/3*i+CW*2/3., CH*.5, 0, 0, 0, 0, WRR));
+ // }
+
+float current_x_position = 0;
+// scubes.add(new StaggeredTower(//tower 1
+// current_x_position, // x
+// 15 , // y
+// 0 , // z
+// 45, 6, new Cube.Wiring[] { WFL, WRR, WFL, WRR, WFL, WRR}) );
+// current_x_position += 25.25;
+// scubes.add(new StaggeredTower(// tower 2
+// current_x_position, // x
+// 0 , // y
+// -10.5 , // z
+// 45, 6, new Cube.Wiring[] { WFR, WFL, WRR, WRR, WFL, WRR}) );
+// current_x_position += 25.25;
+// scubes.add(new StaggeredTower(//tower 3
+// current_x_position, // x
+// 15 , // y
+// 0, // z
+// 45, 6, new Cube.Wiring[] { WRR, WFL, WRR, WRR, WFL, WRR}) );
+// current_x_position += 25.25;
+// scubes.add(new StaggeredTower(//tower 4
+// current_x_position, // x
+// 0, // y
+// -10.5 , // z
+// 45, 6, new Cube.Wiring[] { WFL, WRR, WFL, WRR, WFL, WRR}) );
+// current_x_position += 28;
+// scubes.add(new StaggeredTower(//tower 5
+// current_x_position, // x
+// 15 , // y
+// -4.5 , // z
+// 45, 6, new Cube.Wiring[] { WRR, WFL, WRR, WFL, WRR, WFL}) );
+// current_x_position += 28;
+// scubes.add(new StaggeredTower(//tower 6
+// current_x_position, // x
+// 0 , // y
+// -10.5, // z
+// 45, 6, new Cube.Wiring[] { WFL, WRR, WFL, WRR, WFL, WRR}) );
+// current_x_position += 25.25;
+// scubes.add(new StaggeredTower(// tower 7
+// current_x_position, // x
+// 15 , // y
+// 0, // z
+// 45, 6, new Cube.Wiring[] { WRR, WFL, WRR, WFL, WRR, WFL}) );
+// current_x_position += 25.25;
+// scubes.add(new StaggeredTower(//tower 8
+// current_x_position, // x
+// 0 , // y
+// -10.5 , // z
+// 45, 6, new Cube.Wiring[] { WFL, WRR, WFL, WRR, WFL, WRR}) );
+// current_x_position += 25.25;
+// scubes.add(new StaggeredTower(//tower 9
+// current_x_position, // x
+// 15 , // y
+// 0, // z
+// 45, 6, new Cube.Wiring[] { WFL, WRR, WFL, WRR, WFL, WRR}) );
+// current_x_position += 25.25;
+
+// //TOWERS ON DANCE FLOOR
+// scubes.add(new StaggeredTower(//tower 10
+// 83.75+39+43-124.5, // x
+// 0, // y
+// -47.5-43, // z
+// 45, 4, new Cube.Wiring[]{ WRR, WFL, WFL, WRR}) );
+// scubes.add(new StaggeredTower(//tower 11
+// 83.75, // x
+// 0, // y
+// -47.5, // z
+// 45, 4, new Cube.Wiring[]{ WFL, WRR, WRR, WFL}) );
+// scubes.add(new StaggeredTower(//tower 12
+// 83.75+39, // x
+// 0, // y
+// -47.5, // z
+// 45, 4, new Cube.Wiring[]{ WRR, WFL, WFL, WRR}) );
+// scubes.add(new StaggeredTower(//tower 13
+// 83.75+39+43, // x
+// 0, // y
+// -47.5-43, // z
+// 45, 4, new Cube.Wiring[]{ WFL, WRR, WFL, WRR}) );
+
+// scubes.add(new StaggeredTower(// Single cube on top of tower 4
+// 42, // x
+// 112 , // y
+// 72, // z
+// -10, 1, new Cube.Wiring[]{ WRL}) );
+
+
+
+
+
+
+
+ //////////////////////////////////////////////////////////////////////
+ // BENEATH HERE SHOULD NOT REQUIRE ANY MODIFICATION!!!! //
+ //////////////////////////////////////////////////////////////////////
+
+ // These guts just convert the shorthand mappings into usable objects
+ ArrayList<Tower> towerList = new ArrayList<Tower>();
+ ArrayList<Cube> tower;
+ Cube[] cubes = new Cube[200];
+ int cubeIndex = 1;
+ float px, pz, ny;
+ for (TowerMapping tm : towerCubes) {
+ px = tm.x;
+ ny = tm.y;
+ pz = tm.z;
+ tower = new ArrayList<Cube>();
+ for (CubeMapping cm : tm.cubeMappings) {
+ tower.add(cubes[cubeIndex++] = new Cube(px = px + cm.dx, ny, pz = pz + cm.dz, 0, cm.ry, 0, cm.wiring));
+ ny += Cube.EDGE_HEIGHT;
+ }
+ towerList.add(new Tower(tower));
}
- public int[][] buildRearChannelList() {
- return new int[][] {
- { 33, 34, 35, 36, 0 }, // ch9
- { 37, 38, 39, 40, 0 }, // ch10
- { 41, 42, 43, 44, 0 }, // ch11
- { 45, 46, 47, 48, 0 }, // ch12
- { 49, 50, 51, 52, 0 }, // ch13
- { 53, 54, 55, 56, 0 }, // ch14
- { 57, 58, 59, 60, 0 }, // ch15
- { 61, 62, 63, 64, 0 }, // ch16
- };
+
+ for (Cube cube : singleCubes) {
+ cubes[cubeIndex++] = cube;
+ }
+ for (Cube cube : dcubes) {
+ cubes[cubeIndex++] = cube;
}
+ for (StaggeredTower st : scubes) {
+ tower = new ArrayList<Cube>();
+ for (int i=0; i < st.n; i++) {
+ Cube.Wiring w = (i < st.wiring.length) ? st.wiring[i] : WRR;
+ tower.add(cubes[cubeIndex++] = new Cube(st.x, st.y + CH* 4/3.*i, st.z, 0, st.r, 0, w));
+ }
+ towerList.add(new Tower(tower));
+ }
+
+ return new Model(towerList, cubes, bassBox, speakers);
}
+=======
+static final float SPACING = 27;
+static final float RISER = 13.5;
+static final float FLOOR = 0;
+>>>>>>> 21dffb1b77608cacc57382f3eb6eac3ed16054c3
+
+/**
+ * Definitions of tower positions. This is all that should need
+ * to be modified. Distances are measured from the left-most cube.
+ * The first value is the offset moving NE (towards back-right).
+ * The second value is the offset moving NW (negative comes forward-right).
+ */
+static final float[][] TOWER_CONFIG = new float[][] {
+ new float[] { 0, 0, RISER, 4 },
+ new float[] { 25, -10, RISER, 4 },
+ new float[] { 50, -22.5, FLOOR, 5 },
+ new float[] { 17.25, -35.5, FLOOR, 6 },
+ new float[] { 43.25, -51.5, RISER, 6 },
+ new float[] { 69.25, -56, FLOOR, 6 },
+ new float[] { 12.75, -62.5, RISER, 4 },
+ new float[] { 38.75, -78.5, FLOOR, 5 },
+ new float[] { 65.75, -83, RISER, 5 },
+
+};
+
+public Model buildModel() {
+ List<Tower> towers = new ArrayList<Tower>();
+ Cube[] cubes = new Cube[200];
+ int cubeIndex = 1;
+
+ float rt2 = sqrt(2);
+ float x, y, z, xd, zd, num;
+ for (float[] tc : TOWER_CONFIG) {
+ x = -tc[1];
+ z = tc[0];
+ y = tc[2];
+ num = tc[3];
+ if (z < x) {
+ zd = -(x-z)/rt2;
+ xd = z*rt2 - zd;
+ } else {
+ zd = (z-x)/rt2;
+ xd = z*rt2 - zd;
+ }
+ List<Cube> tower = new ArrayList<Cube>();
+ for (int n = 0; n < num; ++n) {
+ Cube cube = new Cube(xd + 24, y, zd + 84, 0, -45, 0);
+ tower.add(cube);
+ cubes[cubeIndex++] = cube;
+ y += SPACING;
+ }
+ towers.add(new Tower(tower));
+ }
+
+ return new Model(towers, cubes);
+}